GE Healthcare · MRSignaDiscoveryOptima
O2 Alarm Sensor is Defective.O2 Monitor is Alarming and Cannot be Silenced by Relay Reset or Gain Adjust.Replace O2 sens…
O2 Alarm Sensor is Defective.O2 Monitor is Alarming and Cannot be Silenced by Relay Reset or Gain Adjust.Replace O2 sensor in magnet room wqr.Signa HDxT 15.0.5339912
Symptom
O2 Monitor is Alarming and Cannot be Silenced by Relay Reset or Gain Adjust.
Applies to
- Models
- Signa, Discovery, Optima
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Component
- 2112207 ISA 40M OXYGEN SENSOR 2112207 Oxygen monitor sensor FEMC Comments: FLS - REPLACES 46-305001P2. FE WILLNEED TO ORDER 46-320936P1 RETROFIT PLATE KIT IF NOT PREVIOUSLY INSTALLED IN ORDER TO USE THIS NEW OXYGEN SENSOR PER JOHN FERUT, 1-95 IF ORDERING FOR MOBILES THAT HAVE THE OLD STYLE METAL RF CEILING BOX# 46-306602G1, IT SHOULD BE REPLACED WITH NEW CEILING BOX# 2124496 (WHICH ALREADY HAS THIS SENSOR INSIDE). HOWEVER, IF THE MOBILE HAS A REMOTE SENSOR MODULE ON THE CEILING (46-307676P2), THEN THE NEW CEILING BOX IS NOT NEEDED. *MUST ALWAYS HAVE AVAILABLE AS THIS IS A SAFETY ISSUE PART ! JOE BANGO, JR, AT SUPPLIER KNOWS ABOUT THE ADJUSTMENTS REQUIRED AT THE SITES... JL 7/96 FLS - PLEASE CONVERT SPH ORDER TO OVERNIGHT SHIPMENT IF PART AVAILABLE IN MEMPHIS AND IF FEDEX SERVICE (INCLUDING 8:00 AM SERVICE) MEETS FE NEED TIME CRITERIA 5339912 Ambient Oxygen Sensor 5339912 Ambient Oxygen Sensor, replaces 2112207 per Service Note DOC0679605
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.