On bootup or reset get message Give root password for maintance or control D to continue
Symptom
The operating system hangs during boot up or reset and asks the user to complete a FSCK. The right monitor may be blank. A error occurred during the file system check, dropping you to a shell. The system will reboot when you leave the shell. Give root password for maintenance for Control-d to continue. The operating system hangs during boot up or reset and ask the user to complete a FSCK (File System Check). The right monitor may be blank as the boot up did not load far enough to run right monitor. On boot up or reset the user gets the following message: “An error occurred during the file system check, dropping you to a shell. The system will reboot when you leave the shell. Give root password for maintenance or type Control-d to continue.” The system will be at the shell prompt.
Applies to
- Models
- Optima, Discovery, Definium
- Product
- Optima XR640 Discovery XR650
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- AEC Backup Time message
- Definium 8000 Auto positioning does not work after a reset/reboot due to wall stand receptor at a hard limit during rebooting or repowering.
- Definium 8000 One or both monitors display the following message on every boot
- Definium 8000 Wallstand or Table Only Configurations running VolumeRAD M3 Software.
- Definium 8000 OTS Collimator has no power due to a tripped breaker (CB8) ont he Tube Suspension Logic (TSL) Board.
- Definium 8000 The Siemens Collimator has not power due to a tripped breaker (CB9) on the Tube Suspension Logic (TSL) Board.