GE Healthcare · MRSigna1414911017
Failed to Print on DICOM Printer Due to 8 Port Switch Hub in GOC.
Symptom
Unable To Dicom Print
Error message
14149 Failed to Print on DICOM Printer Tue Aug 27 07:15:31 2002 Error: 14149 Host: lx-mr Process: prsserver File: prsjob.c Line: 783 Failed to Print on DICOM Printer 11017 Failure to deinit DCM DCM has not been initialized (101)
Applies to
- Models
- Signa
- Product
- 3.0T Signa HDxT For 3.0T Signa HDxT systems with 15.0 software only. For 3.0T Signa HDxT systems with 15.0 software only.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Component
- 5139480-2 8 PORT GIGABIT ETHERNET SWITCHING HUB See long description for important note FEMC Description: 8-Port Switch Kit with 4 cushions To view the most recent appropriate and detailed documentation, click to go to SERVICE METHODS. Note: BE CAREFUL when ordering this part. Per the FRU manuals, some products use this part for GOC and/or System Cabinet and some don't. Some products are supposed to use the 2272740-3 8 PORT 10/100 INTEL HUB SERVICE KIT as the FRU. Please check the FRU manual for your system to see whether this part should really be used on the Product and for the purpose (i.e. GOC and/or Sys Cab).
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.