GE Healthcare · MRSignaOvation225421222245894062796
RF calibration not in specification.
Symptom
Will Not Scan With RF Errors Will not scan with RF errors
Error message
2254212 SRFD2 RF Amplifier Peak Power Fault. Peak Power from RF Amplifier Exceeds Specification Fri Apr 30 14:23:00 2004 Error: 2254212 Host: lx-mr1 Process: NSP File: SCP:../RfNbMdsHWO.cpp Line: 2218 SRFD2 RF Amplifier Peak Power Fault. Peak power from RF Amplifier exceeds specification(72.5dBm). Possible causes: the PSD exceeds system limits, RF Gain miscalibration, defective Exciter, or defective RF Amplifier.-> 2224589 TG reached the high limit. See Long Description Suite: MR01 Host: OC0 Proc: MSG_HANDLR0 Error: 2224589 File: PMH.m 1.29 Method: ps_send_ta Line: 50 TG reached the high limit. Check patient positioning and verify the patient is not touching the transmit coil. Try Auto Prescan again or use Manual Prescan. Note: On later systems, this same error code has been slightly reworded to read as follows: Thu Jun 12 11:06:12 2008 Error: 2224589 Host: MENEMR Process: NSP File: TPS:aps_exec Line: 4062796 TG reached the high limit. TG has been set to 190. Check patient positioning and if desired try Auto Prescan again or use Manual Prescan.
Applies to
- Models
- Signa, Ovation
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.