GE Healthcare · MR22245832225552
Multi Coil TR Driver Fault.
Symptom
Unable to Scan with Multi Coil TR Driver Faults
Error message
2224583 Auto Prescan Failed, Possible Data Acquisition Failure. File: APS:aps_cf Line: 15 Auto Prescan failed, possible data acquisition failure. 2225552 Multi-Coil T/R Driver Board Fault. An Open Circuit was Detected on Port 2. Thu Aug 21 12:06:10 1997 Suite: MRS1 Host: OC0 Proc: HPC_PORT_ID Error: 2225552 File: PMH.m 1.29 Method: spi_tr_mon Line: 6240 Multi-Coil T/R Driver Board Fault An open circuit was detected on port 2. Check cable to multi-coil board or check for an open pin diode.
Applies to
- Product
- HF OpenSpeed HFO1 HFO2 and HFO3 Only.
- Software
- HFO3
- Component
- 2419602 0.7T CTL ARRAY COIL, W/CABLE 2419602 0.7T CTL ARRAY COIL, W/CABLE .
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- The system is unable to scan with any surface coil, get dynamic disable faults.
- Driver Module Errors Due to the MRID 1.5T 8 Channel NV Array Coil.
- Unable to scan with multicoil TR driver faults due to a failed preamp protection module.
- CWA ID116971. Coil not plugged in properly.
- TR Driver Faults Due to Shoulder Coil
- Grainy Head Coil Images and RF Transmit Power faults due to Head TR Assembly.