GE Healthcare · Nuclear MedicineDiscoveryMillennium
Drivers Voltage Test Error # 72 PSD # 1 is pressed voltage disconnected.
Symptom
Drivers Voltage Test Error # 72 PSD # 1 is pressed voltage disconnected. After rebooting the system, Slip Ring Error # 85 Initial Error # 72, After Reboot, Error # 85. With PSD ByPass Installed, Error # 70 Drivers Voltage Test Error # 72 PSD # 1 is pressed voltage disconnected. After rebooting the system, Slip Ring Error # 85 Initial Error # 72, After Reboot, Error # 85. With PSD ByPass Installed, Error # 70
Error message
Error # 85 (Error 85) Slip Ring Error is Constant Active Error # 72 (Error 72) DRIVERS VOLTAGE TEST: PSD IS PRESSED, VOLTAGE DISCONNECTED
Applies to
- Models
- Discovery, Millennium
- Product
- VGH VG and VG Hawkey and Varicam
- Component
- *Gantry Gantry Gantry 2199259 VG DISTRIBUTOR BOARD 2199259 VG DISTRIBUTOR BOARD PCA000063 , 47036501915 Part #: 2199259 Part Type: GP CONSUMABLES Part Weight: 1.12 LBR Repairable: No Returnable: No Hazardous Material: N Description: 470-3650-1915,DISTRIBUTOR BOARD FRU: Yes Status: Orderable
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size