Low noise due to Pre Amplifier failure. 16 Channel Switch Diagnostics Fail.

Symptom

Error message

2247387 The noise energy level is lower than expected for channels: 7 See Long description Error: 2247387 Host: signa3 Process: diagCoord File: rrfRxFruIso.c Line: 2794 Diagnostic: 16 Channel Switch Iteration: 1 of 1 Action: 1 Task ID: 0x7f541f0 Time: 1162985 Object: APS Test Task Function: Software/Firmware/Config: N/A Test: '16 Ch Switch Input Osc. LB(L)' diagnostic error. The noise energy level is lower than expected for channels: 7->

Applies to

Models

Signa

Product

3.0T Signa HDxT For 3.0T Signa HDxT systems with 15.0 software only. For 3.0T Signa HDxT systems with 15.0 software only.

Software

15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --

Component

3T Multicoil I/F Assembly Preamp – 2323890-5 This is a single preamp for the 3T Multicoil Assembly located in the LPCA. This part should be ordered if you are able to isolate to a problem preamp. 3T Multicoil I/F Assembly Preamp – 2323890-5 This is a single preamp for the 3T Multicoil Assembly located in the LPCA. This part should be ordered if you are able to isolate to a problem preamp. 3T Multicoil I/F Assembly Preamp – 2323890-5

Area

MR

Related GE Healthcare MR issues

• Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
• Fails to Scan with TORSO Coil.
• The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
• AE title has changed on destination host.
• CWA ID100315. Auto and Manual Prescan Fails.
• What is the Acoustic Noise Level in the Ovation Magnet.