GE Healthcare · Nuclear Medicine
Ventri System fails on the startup tests with error on GCU PSD Logical Test
Symptom
Ventri System fails on the startup tests with error on GCU PSD Logical Test In SysLog.csv the error is reported as: ERROR_GCU_PSD_LOGICAL_TEST:.: GCU logical PSD test failure:.:1)Retry the last operation. 2)If PSD is pressed release the PSD and retry the operation. 3) If emergency button is pressed release the emergency button and retry the operation. 4) Perform Gantry Reset and retry the operation: GCU logical PSD test failure description: Timeout on Power Off.
Error message
ERROR_GCU_PSD_LOGICAL_TEST ERROR_GCU_PSD_LOGICAL_TEST:.: GCU logical PSD test failure:.:1)Retry the last operation. 2)If PSD is pressed release the PSD and retry the operation. 3) If emergency button is pressed release the emergency button and retry the operation. 4) Perform Gantry Reset and retry the operation: GCU logical PSD test failure description: Timeout on Power Off.
Applies to
- Product
- Ventri Ventri Ventri
- Component
- 5148184 PSSF - 20-75H, 52V DRIVERS BUS Power Supply - Ventri 5148184 PSSF - 20-75H, 52V DRIVERS BUS Power Supply - Ventri 5148184 PSSF - 20-75H, 52V DRIVERS BUS Power Supply - Ventri *Gantry Gantry Gantry
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- Muga patch FMI 40788 when loaded does not indicate it completed
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Part number needed for Optima E-Stop
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Service Note 43783_1 Feb/08 Infinia/Ventri/Xeleris 1.1 & 2
- Need part numbers for the Millennium MG/MC table E-Stop