GE Healthcare · X-ray R&FDefiniumDiscoveryOptima
after X-ray, no image displayed and system stuck .After system reboot the patient is not in the list (exam is lost). may…
after X-ray, no image displayed and system stuck .After system reboot the patient is not in the list (exam is lost). may happen in single energy or tomo pasting etc..
Symptom
After exposure, there is no image displayed and system if frozen. After system reboot the patient is not listed (Image Management Screen) and customer may think images are lost.
Applies to
- Models
- Definium, Discovery, Optima
- Product
- Definium 8000 Definium 6000 Discovery XR650
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- AEC Backup Time message
- Definium 8000 Auto positioning does not work after a reset/reboot due to wall stand receptor at a hard limit during rebooting or repowering.
- Definium 8000 One or both monitors display the following message on every boot
- Definium 8000 Wallstand or Table Only Configurations running VolumeRAD M3 Software.
- Definium 8000 OTS Collimator has no power due to a tripped breaker (CB8) ont he Tube Suspension Logic (TSL) Board.
- Definium 8000 The Siemens Collimator has not power due to a tripped breaker (CB9) on the Tube Suspension Logic (TSL) Board.