GE Healthcare · X-ray R&FDefinium3601277
error code 3601277 ,right cell does not stop.
Symptom
error code 3601277 ,right cell does not stop. error code 3601277 ,right cell does not stop.The left and center cells are ok.Impossible to calibrate rejection of the right cell. The right cell is not working even on the table, or OTS .
Error message
3601277 Recovery Class: ABORT Error Text: Generator error 100-1301;(4): AEC Board com problem
Applies to
- Models
- Definium
- Product
- Definium 8000
- Component
- Cable MIS 11750A ref 2407432 Short-circuit in the cable MIS 11750A ref 2407432
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- AEC Backup Time message
- Definium 8000 Auto positioning does not work after a reset/reboot due to wall stand receptor at a hard limit during rebooting or repowering.
- Definium 8000 One or both monitors display the following message on every boot
- Definium 8000 Wallstand or Table Only Configurations running VolumeRAD M3 Software.
- Definium 8000 OTS Collimator has no power due to a tripped breaker (CB8) ont he Tube Suspension Logic (TSL) Board.
- Definium 8000 The Siemens Collimator has not power due to a tripped breaker (CB9) on the Tube Suspension Logic (TSL) Board.