GE Healthcare · MRSigna
Cradle Will Move in Briefly then Stop Due to Table Plunger or cradle release Pin was preventing the table from advancing…
Cradle Will Move in Briefly then Stop Due to Table Plunger or cradle release Pin was preventing the table from advancing.
Symptom
Table Cradle will Move In Briefly then Stop See Long Description Cradle will not drive in completely.
Applies to
- Models
- Signa
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Component
- 2330269 PLUNGER_SLIDE assembly which includes the Cradle Release Screw 2330269 PLUNGER_SLIDE - this assembly includes the Cradle Release Actuator Screw. For Low Profile Carriage Assembly.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.