GE Healthcare · Nuclear MedicineMillennium100008553
VGH system will not acquire getting Front End Initialization error
Symptom
VGH system will not acquire getting Front End Initialization error VGH system will not acquire getting Front End Initialization error.
Error message
Failed to initialize Front End (FE) Folllowing Example Only: Error on file error.log (apex\log\d): *** ERROR: in QfsSetPortAdr: SetPortAdr failed to set port <e05>, error <5> *** ERROR: in QfsSetControl: Failed to set control <EVENT_DETECTOR> *** ERROR: in QfsLoadContPorts: failed to load control ports *** ERROR: in QfsGetFile: Failed to read FEPAR file <5> commerr.log (acqdb\fe\error), after FE Diagnostic: Starting test fecomm 04/09/10 21:51:10 ERROR - Write port failed - port = e05 error = 504/09/10 21:51:10 ERROR - FRU - DOC 2 board - write error to DOC04/09/10 21:51:10 ERROR - COMMUNICATION TEST FAILED !!04/09/10 21:51:10 *** warnings:04/09/10 21:51:10 *** NO_RESPONE: 1204/09/10 21:51:10 *** CORRECT_DATA: 004/09/10 21:51:10 *** CRC_ERROR: 004/09/10 21:51:10 *** VIOLATION_ERROR: 004/09/10 21:51:10 *** SEMAPHORE_ERR: 004/09/10 21:51:10 *** TIMEOUT_ERR: 004/09/10 21:51:10 *** ENTER_CRIT_SEC_ERR: 004/09/10 21:51:10 *** EXIT_CRIT_SEC_ERR: 004/09/10 21:51:10 *** OTHERS: 004/09/10 21:51:10 *** TOTAL: 1204/09/10 21:51:10 *** End Test senseheat results: *** SENSORS TEST REPORT *** PORT HEAD 1 HEAD 2 --------------------------------------------- DOC_sens_1 31.176 26.144 DOC_sens_2 26.998
Applies to
- Models
- Millennium
- Product
- VGH VG and VG Hawkey and Varicam
- Component
- *Detector (Imaging Detector) *Detector (Imaging Detector) *Detector (Imaging Detector) PCA000412 VG CDOC Card (same as PCA000406 same as 5252407) PCA000412 VG CDOC Card (same as PCA000406 same as 5252407) PCA000412 VG CDOC Card (same as PCA000406 same as 5252407)
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size