GE Healthcare · MRSigna2258107
Port A on the LPCA has a partial short between pins 2 and 3 of the K column.
Symptom
Any receive only coil connected to Port A immediately generates error 2258107 Coil ID light goes through normal sequence (brief red, then green) then error 2258107 is logged.
Error message
2258107 Host coil validation error Body Transmit Enable mismatch detected Error: 2258107 Host: MR3T Process: coilCK File: coilCK scp.c Line: 1026 Exception Class: Unknown Function: Host: Coil Check Host coil validation error: Body Transmit Enable mismatch detected. Connector: Multicoil A Port Coil: HD Shoulder Array by GE - A/B port
Applies to
- Models
- Signa
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Component
- 5111020-50 HDMR2 A plus Bezel and cable harness.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.