GE Healthcare · MRSigna
Patient alarm is not working due to Alarm Control Unit.
Symptom
Patient Alert Alarming Intermittently. See Long Description The alarm will activate even when the patient does not have the squeeze bulb in hand.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 46-317758P20 Patient ALARM UNIT CONTROL see long description 46-317758P20 ALARM UNIT CONTROL Note: ALARM UNIT CONTROL BOX WITH PRESSURE RELIEF ADAPTOR. REPLACES 46-317758P7 PER PCN 207481, WHICH HAD NO PRESSURE RELIEF ADAPTOR (46-317758P19),PER JOHN PRENDERGAST. MS7093 2-14-00
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.