GE Healthcare · MRSigna
8 Channel Coils are Not Recognized by Coil ID Due to Coil receptacle A not allowing coils to be plugged in properly. 8 C…
8 Channel Coils are Not Recognized by Coil ID Due to Coil receptacle A not allowing coils to be plugged in properly. 8 Channel Coils are Not Recognized by coil id.
Symptom
8 Channel Coils are Not Recognized by coil id
Applies to
- Models
- Signa
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Component
- 5111020 Excite III A-Bezel and cable harness. 5111020 Excite III A-Bezel and cable harness.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.