MPR/MPS Multiple intermittent gantry collisions, loading calibration data messages and other symptoms.
Symptom
MPR/MPS Multiple intermittent gantry collisions, loading calibration data messages and other symptoms. MPR/MPS Multiple intermittent gantry collisions, loading calibration data messages and other symptoms were observed on the system over a period of time. Frequent intermittent collisions. Frequent "Loading Calibration data" message when queuing up studies. 24V output on A1 in IPS intermittently drops to ~10 V while rotation (use EUI for convenience). Note: When the A1 voltage drops to ~10 V the Tilt axis will move very fast if attempting to move Table UP/DOWN axis.
Applies to
- Models
- Millennium
- Product
- MPR/MPS Millennium MPR Millennium MPS
- Component
- 5265271 MPR/MPS Detector to Gantry Cable 5265271 MPR/MPS Detector to Gantry Cable CBL001413, 2154524-2, 9CBL0343-B *Gantry Gantry Gantry
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size