GE Healthcare · Nuclear MedicineMillennium
Image has a sharp edge, counts detected and energy peak are abnormal.
Symptom
Image has a sharp edge, counts detected and energy peak are abnormal. Error message Detector is outside the range of calibration during PMTune.
Error message
CSE Detector is near the edge of the range of calibration. It should be retuned when convenient Working points are outside the range of calibration CSE Detector is near the edge of the range of calibration. It should be retuned when convenient Prompt: Detector 1:The working points are outside the range of Calibration The detector can still be used but image quality should be checked and it should be returned as soon as possible. Millennium CSE detector is outside the range of calibration. It can still be used but image quality should be checked and it should be retuned as soon as possible
Applies to
- Models
- Millennium
- Product
- MG/MC/Myosight Millennium MG/MC Millennium MyoSIGHT MPR/MPS Millennium MPR Millennium MPS
- Component
- *Detector (Imaging Detector) *Detector (Imaging Detector) *Detector (Imaging Detector)
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size