GE Healthcare · Nuclear MedicineMillennium
When booting Genieacq hangs at Startup ICON
Symptom
When booting Genieacq hangs at Startup ICON After logging into genieacq, starts to boot, screen clears and see Icon in top right side labeled Lynx Startup. If open Startup Icon see last line "Executing aui ......."
Applies to
- Models
- Millennium
- Product
- MG/MC/Myosight Millennium MG/MC Millennium MyoSIGHT MPR/MPS Millennium MPR Millennium MPS
- Software
- Genieacq 2.5 Genieacq 2.5 build 15 Software Revision: Genieacq 2.5 Build 15 Kit Part Number: FMI # / Service Note #: FMI 40687 Comments: For MG, MC, MPR, MPS, IBACQ (400A), OptimaNX. Not for MPT, IBx (X detector), or MyoSight.
- Component
- *Detector (Imaging Detector) *Detector (Imaging Detector) *Detector (Imaging Detector)
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size