GE Healthcare · CTLightSpeed26000784850092
LightSpeed 5.X (60kW)
Symptom
Attention The detector is not at the proper temperature. see long description for more detail. Attention The detector is not at the proper temperature. If you wish to proceed with this scan select the "OK" button, however IQ may be degraded including image artifacts. Please contact GE Service
Error message
Error: 260007848 DHCB Sensor and/or Control Abort error See long description for full error Host: DAS Process: DCB Firmware File: detmgr.c Line: 1090 Function: DATA ACQUISITION : Scan Data Acquisition Scan: 50092/1/1 Type: Axial Exception Level: Sec/Soft Time: 09:22:54:900 Log Series: 43 DHCB has issued an abort condition - DHCB Error is as follows: DHCB Sensor and/or Control Abort error
Applies to
- Models
- LightSpeed
- Product
- LightSpeed 5.X (60kW) LightSpeed 5.X (60kW) ~ Use with MDAS or GDAS HP_P_G4 HP_P_G8 HP_P_G16 HP_P_M16 LightSpeed 5.X 60KW G-DAS16 with GRE Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required