GE Healthcare · X-ray R&FDefinium
Embedded PC does not display the applications properly on the X-ray Tube touch screen display
Symptom
Embedded PC does not display the applications properly on the X-ray Tube touch screen display See Long Description The D5K Embedded PC does not display the applications properly on the X-ray Tube touch screen display. The Embedded PC applications is not in English and appears to be in Spanish. We were trying to put the positioner in "Free Move" mode by booting up the positioner (Embedded PC) only, without fully booting the system (the Magic PC was off).
Applies to
- Models
- Definium
- Product
- Definium 5000
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- AEC Backup Time message
- Definium 8000 Auto positioning does not work after a reset/reboot due to wall stand receptor at a hard limit during rebooting or repowering.
- Definium 8000 One or both monitors display the following message on every boot
- Definium 8000 Wallstand or Table Only Configurations running VolumeRAD M3 Software.
- Definium 8000 OTS Collimator has no power due to a tripped breaker (CB8) ont he Tube Suspension Logic (TSL) Board.
- Definium 8000 The Siemens Collimator has not power due to a tripped breaker (CB9) on the Tube Suspension Logic (TSL) Board.