GE Healthcare · X-ray R&FDefinium
The positioner vertical column mechanical installation transportation dollies do not seem to be mounting properly
Symptom
The positioner vertical column mechanical installation transportation dollies do not seem to be mounting properly See Long Description The D5K positioner vertical column mechanical installation transportation dollies do not seem to be mounting properly. We are having trouble understanding the proper configuration because these devices are difficult to figure out, for the correct mounting process, and the required hardware. The lifting device winch does not appear to be engaging properly, during the column raising procedure.
Applies to
- Models
- Definium
- Product
- Definium 5000
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- AEC Backup Time message
- Definium 8000 Auto positioning does not work after a reset/reboot due to wall stand receptor at a hard limit during rebooting or repowering.
- Definium 8000 One or both monitors display the following message on every boot
- Definium 8000 Wallstand or Table Only Configurations running VolumeRAD M3 Software.
- Definium 8000 OTS Collimator has no power due to a tripped breaker (CB8) ont he Tube Suspension Logic (TSL) Board.
- Definium 8000 The Siemens Collimator has not power due to a tripped breaker (CB9) on the Tube Suspension Logic (TSL) Board.