Changing the Magic PC default annotation font size
Symptom
Changing the Magic PC default annotation font size
The Default Annotation Size is currently configurable See Long Description This is now configurable. Follow the instructions below: The Default Annotation Size is made configurable and the options available are +3, +2, +1, N, -1, -2. Press Ctrl+Shift+F5 Start a Linux window by pressing the first icon on the left Change to the following directory by typing the following: cd /magichome/xruser/config 4. Edit the FONT_ COMBO_DEFAULT_SELECT_OPTION value from the default value to the desired value (+3, +2, +1, N, -1, -2) in the PrintFontSize.prop file using gedit. gedit PrintFontSize.prop FONT_SIZE_MAGNIFICATION_FACTOR = 1 (Font Size Magnification factor options: 1,2,3) FONT_COMBO_DEFAULT_SELECT_OPTION = +1 (Font Combo options: +3,+2,+1, N, -1, -2)
Applies to
- Models
- Definium
- Product
- Definium 8000
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- AEC Backup Time message
- Definium 8000 Auto positioning does not work after a reset/reboot due to wall stand receptor at a hard limit during rebooting or repowering.
- Definium 8000 One or both monitors display the following message on every boot
- Definium 8000 Wallstand or Table Only Configurations running VolumeRAD M3 Software.
- Definium 8000 OTS Collimator has no power due to a tripped breaker (CB8) ont he Tube Suspension Logic (TSL) Board.
- Definium 8000 The Siemens Collimator has not power due to a tripped breaker (CB9) on the Tube Suspension Logic (TSL) Board.