Magnet Display shows 00 00 two zeroes on each side of display Due to SRI.

Symptom

Error message

2225330 SRI-SPI Communication Error see long Error: 2225330 Host: lx-mr Process: NSP File: HPC_PORT_ID:spi_sri_get_pkt Line: 1 SRI-SPI Communication Error. The SPI received a packet from the SRI containing an unknown opcode. Opcode: 0x21

2225334 SPI-SRI Communication Error. SRI failed to respond to a data packet from SPI. Error: 2225334 Host: MRS2 OC0 Process: NSP File: HPC PORT ID:spi sri resp timeout Line: 12 SPI-SRI Communication Error. SRI failed to respond to a data packet from SPI. Data packets waiting for a response: 0x4000

2222428 SRI LOCAL TEST FAILURE 2222428 SRI LOCAL TEST ERROR. EPROM Checksum Error. Checksum expected was not equal to checksum calculated. Checksum Expected: ffffffffH Checksum Calculated: ffffabaaH

2222450 SRI did not acknowledge the opcode sent from SPI. see long Error: 2222450 Host: lx-mr Process: diags File: diagsMain.cc Line: 2332 IPG DIAG - SRI ERROR. SRI did not acknowledge the opcode sent from SPI. Check to make sure that the xmit and rcv cables are c onnected properly. Channel: 1 Opcode Sent: 33H Opcode Expected: b0H Opcode Rcvd: baH

Applies to

Models

Signa

Product

Signa LX Signa LX Product can be used with 8.x and 9.x systems.

Software

9.1 For Signa LX product only

Component

46-288016G9 SRI BOARD WITH DUAL SENSOR DAUGHTER

Area

MR

Related GE Healthcare MR issues

• Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
• Fails to Scan with TORSO Coil.
• The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
• AE title has changed on destination host.
• CWA ID100315. Auto and Manual Prescan Fails.
• What is the Acoustic Noise Level in the Ovation Magnet.