GE Healthcare · MRSigna
Indigo Computer fails to boot due to failed CPU Motherboard.
Symptom
The Indigo Computer fails to Boot, the LED is Solid Amber LX system with an Indigo computer running 8.3 M5 Software. The Indigo computer fails to boot up. The led on the front of the computer is Amber. The fan is running and the led is lit on each of the SCSI peripherals, the CD, The floppy, and the MOD. No video is seen on the monitor.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 8.3 8.3
- Component
- 2115457-28 BOARD SET IP22–GEMS W/250MHZ R4400 CPU MOD & AUDIO for Indigo computer. See long description ** FE ASSIST ** 1. You must push the power reset switch located on the Paddle Board or the system will not boot when the Console is powered on. ** 2. The IP22 is tested with a known good set of Simm memory modules. New memory modules must be ordered separately. **16 MB Simm Memory Part Number: 2115457-22. **32 MB Simm Memory Part Number: 2115457-23. **3. For assistance on T/S CPU boot problems refer to CTi Service Tips Direction 2160288-100 Minimum Boot Configuration.(212001261 7/11/07)
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.