Intermittently unable to scan with CAN errors 2252132 PDO Communication Failure and 2252133 SDO Communication Failure lo…
Intermittently unable to scan with CAN errors 2252132 PDO Communication Failure and 2252133 SDO Communication Failure logged.due to CAN terminators and CAN cable.
Symptom
Intermittently unable to scan with CAN errors 2252132 PDO Communication Failure and 2252133 SDO Communication Failure logged. see long description Intermittently unable to scan with CAN errors 2252132 "PDO Communication Failure" and 2252133 "SDO Communication Failure" logged. (see below for errors). Error: 2252132 Host: OC0 Process: NSP File: SCP:NodeData Line: 1324 Exception Class: Unknown Severity: Unknown Function: Peripherals: Communications PSD: T2flair Coil: 8HRBRAIN Scan: 395/5 PDO Communication Failure was detected on the CANopen Protocol. Node Detecting Failure = SCP. Node ID = 7. PDO Number = 9. Error Code = 0x1001.-> Extended Error: A PDO Communication packet failed to process on this CAN node. This could be caused by a disconnected cable or a reset or loss of power of the module containing the CAN node. Error: 2252133 Host: OC0 Process: NSP File: SCP:sdo_segment_upload Line: 1700 Exception Class: Unknown Severity: Unknown Function: Peripherals: Communications PSD: SPGR Coil: 8HRBRAIN Scan: 394/3 SDO Communication Failure was detected on the CANopen Protocol. Node Detecting Failure = SCP. Node ID = 14. Index = 0x3003. SubIndex = 0x0. Error Code = 0x1001.-> Extended Error: A SDO Communication packet failed to process on this CAN node. This could be caused by a disconnected cable or a reset or loss of power of the module containing the CAN node.
Error message
2252132 PDO Communication Failure was detected on the CANopen Protocol Node Detecting Failure = SCP Wed Aug 25 08:04:47 2004 2252132 2 MR-OC0 NSP SCP:NodeData 1128 PDO Communication Failure was detected on the CANopen Protocol. Node Detecting Failure = SCP. Node ID = 2. PDO Number = 3. Error Code = 0x1002.-> 2252133 SDO Communication Failure was detected on the CANopen Protocol Node Detecting Failure = SCP Wed Aug 25 08:04:47 2004 2252133 2 MR-OC0 NSP SCP:sdo_segment_upload 1408 SDO Communication Failure was detected on the CANopen Protocol. Node Detecting Failure = SCP. Node ID = 4. Index = 0x3003. SubIndex = 0x0. Error Code = 0x1002.->
Applies to
- Models
- Signa
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Component
- 5117168 Can Terminator,series 2303317 CAN TERMINATION (MALE) 2323878 9PIN SUBD CABLE (MALE TO FEMALE)
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.