GE Healthcare · MRSigna2223822
System fails to boot Applications software and TPS Reset Fails Due to No Power to the Systems Cabinet.
Symptom
System fails to boot Applications software and TPS reset fails. See long description. The system is a 1.5T LX, running 9.1 M4 software. The system will not boot applications. Looks like the Bit3 is down. Errors in the log look like TPS reset failure. Ping to tps fails as seen below: lx-mr 6# ping lx-mr-tps PING lx-mr-tps (216.33.27.2): 56 data bytes ping: sendto: Connection refused
Error message
0 Ermes error Mon Aug 21 07:08:29 2006 Error: 0 Host: lx-mr Process: NSP File: mrmailmgr.c Line: 473 Ermes error, key: 0, error: 4009. 2223822 Reset TPS was not successful. Check System Cabinet power and connections via BIT3 interface. Sat Nov 6 07:30:31 2004 Error: 2223822 Host: lx-mr1c Process: NSP File: TardisReset.cc Line: 522 Reset TPS was not successful. Check System Cabinet power and connections via BIT3 interface.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 2149852-3 BIT3 module Fiber optic convertor used on Indigo and early Octane LX systems. Fiber optic convertor used on Indigo and early Octane LX systems.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.