GE Healthcare · MRSigna
What Voltage Should be Read at the Table Longitudinal Drive Motor Leads.
Symptom
What Voltage Should be Read at the Table Longitudinal Drive Motor Leads See Long Description What voltage should be read at the table longitudinal drive motor leads in the rear pedestal? The longitudinal motor is driven from the SSM, specifically from the Dock/Light board within the SSM. The FE is troubleshooting a table problem and finds this information poorly documented. He needs to know what the normal voltages are, how to measure them, and the Dock/Light board test points where these voltages may be measured.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.