GE Healthcare · MRSigna
HNS MCQA SNR Fails with Current Coil Configuration was not Supported Due to Wrong Coil Setup for the Test.
Symptom
Cannot scan HNS coil with MCQA SNR tool See Long Description MCQA tool fails when trying to scan HNS coil with all three connectors connected at same time,
Error message
The current coil configuration was not supported, invalid See long description FE installing the HNS coil and went to run the MCQA Tool to confirm performance. System reporting that the current coil configuration was not supported, invalid. Message Appears When Starting the MCQA Tool Indicating that the Current Coil Configuration is Invalid. HNS Coil Plugged in.
Applies to
- Models
- Signa
- Product
- 3.0T Signa HDxT For 3.0T Signa HDxT systems with 15.0 software only. For 3.0T Signa HDxT systems with 15.0 software only.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.