GE Healthcare · MRSigna
Low Hydraulic Fluid Level.
Symptom
The Table Will Not Raise Up When Using the Dock Foot Pedal See Long Description When the foot pedal is pressed, the dock motor runs, but the table either does not go up or goes up very slowly. The pedal at the foot end of the table will raise the table normally.
Applies to
- Models
- Signa
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Component
- 46-230006P2 Table Hydraulic Fluid The hydraulic fluid p/n is 46-230006p2. This part number can be found in the table section of the renewal parts manual. The description is "light-colored, filtered, indefinite shelf-life hydraulic fluid, one gallon"
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.