GE Healthcare · MRSigna2224842
When the Cradle Returns to Home, it Will Reverse Direction and Move Toward the Bore of the Magnet.due to Shorted Pen Pan…
When the Cradle Returns to Home, it Will Reverse Direction and Move Toward the Bore of the Magnet.due to Shorted Pen Panel Filter (at PP1-J47) for Cable Run 387.
Symptom
When the Cradle Returns to Home, it Will Reverse Direction and Move Toward the Bore of the Magnet.
Error message
2224842 SRI Hardware Error Unexpected cradle motion. Thu Jun 9 13:59:11 2005 Error: 2224842 Host: MR_PHC Process: NSP File: HPC_PORT_ID:sri Line: 99 SRI Hardware Error: Unexpected cradle motion. This error would occur if the table were moved by hand. Please run SRI diagnostics if that is not the case. Expected Cradle Velocity: -100 mm/sec Measured Cradle Velocity: 189 mm/sec
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 46-271920P3 Filter Assembly See Long Description 46-271920P3 Filter Assembly 25-PIN SUB-D MALE-FEMALE FILTER ASM (This is the pen panel filter that the table elevation (dock) motor drive cable Run 387 connects to, to J47 on the pen panel). In FEMC this part is listed as "CONNECTOR".
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.