APS AGP Incompatible Errors Due to AGP Board for MGD is not compatible with CAM chassis
Symptom
APS AGP is Incompatibe with the Bridge Board and CAM Chassis Errors See long description Ordered the AGP for an MGD chassis and found that it worked in his APS slot but in the AGP slot it reported as an APS board. Fri Jul 24 05:01:29 2009 Error: 2249441 Host: SMCLXMR Process: diagCoord File: utilities.c Line: 1400 Task ID: 0x7effdf0 Time: 1294 Object: APS Exception Class: Unknown Function: Software/Firmware/Config: N/A The FLASH revision on Motorola board specified in the Object field (APS/AGP) is incompatible with the Bridge Board and CAM Chassis. Please contact your Service Representative as soon as possible. Current FLASH rev. is Jun 6 2005, 15:39:23.
Error message
2249441 The FLASH revision on Motorola board APS/AGP is incompatible with the Bridge Board and CAM Chassis Fri Jul 24 05:01:29 2009 Error: 2249441 Host: SMCLXMR Process: diagCoord File: utilities.c Line: 1400 Task ID: 0x7effdf0 Time: 1294 Object: APS Exception Class: Unknown Function: Software/Firmware/Config: N/A The FLASH revision on Motorola board specified in the Object field (APS/AGP) is incompatible with the Bridge Board and CAM Chassis. Please contact your Service Representative as soon as possible. Current FLASH rev. is Jun 6 2005, 15:39:23.
Applies to
- Models
- Signa, Ovation
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Component
- 2294300-18 APS2 Board This part is meant for use in Combined Asc Mgd (CAM) Chassis released in Q4 of 2007. It is supported by these software revisions or later: HDx 14.0 M5, HDe 14 M4 with Service Pack 4, and Ovation 5 (MFO) post-M4. MGD Chassis operating with 14.0 M5 or later may also be shipped with this part. MGD Chassis (NOT CAM) can substitute 2294300-16 if necessary. 212002950 02/14/2008.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.