GE Healthcare · X-ray R&FDefinium
System will not completely shut off when doing a shutdown
Symptom
System will not completely shut off when doing a shutdown See Long Descripton On an AMX700 the system would not completely shut off when doing a shutdown. The computer would shut down and then the message appears instructing the user to turn the key switch off. Turning the key switch has no affect and the system is still on requiring to flip the CB to remove power.
Applies to
- Models
- Definium
- Product
- Definium AMX 700
- Component
- Digital Platform Power Supply Part number 5135781-2. Digital Platform Power Supply Part number 5135781-2.
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- AEC Backup Time message
- Definium 8000 Auto positioning does not work after a reset/reboot due to wall stand receptor at a hard limit during rebooting or repowering.
- Definium 8000 One or both monitors display the following message on every boot
- Definium 8000 Wallstand or Table Only Configurations running VolumeRAD M3 Software.
- Definium 8000 OTS Collimator has no power due to a tripped breaker (CB8) ont he Tube Suspension Logic (TSL) Board.
- Definium 8000 The Siemens Collimator has not power due to a tripped breaker (CB9) on the Tube Suspension Logic (TSL) Board.