GE Healthcare · MRSignaDiscoveryOptima2237297223728522372732227556
CWA ID142078. Can Not Scan.
Symptom
Can Not Scan
Error message
2237297 CERD BOOT ERROR The CERD did not respond to a boot command in the allotted time. Host: lx-bay14b Proc: NSP Error: 2237297 File: TPS:cx_dpr_utils.c Line: 113 CERD BOOT ERROR The CERD did not respond to a boot command in the allotted time. CERD command : 32 response time : 100 2237285 CERD BOOT FAILURE Unable to load software to the CERD board. 2237285 Host: TSMR Process: NSP File: TPS:cx_init.c Line: 117 CERD BOOT FAILURE Unable to load software to the CERD board. 2237273 CERD BOOT ERROR CERD boot software on TPS timed out while waiting for a response from the CAP. Host: lx-bay14b Proc: NSP Error: 2237273 File: TPS:cx_dpr_utils.c Line: 196 CERD BOOT ERROR CERD boot software on TPS timed out while waiting for a response from the CAP. IT MAY BE NECESSARY TO CYCLE POWER ON THE ISE CHASSIS TO CLEAR THIS CONDITION. timeout duration = 100 2227556 *** Reset/Download TPS was not successful. *** 2227556 sdm sdm_main.c 320 *** Reset/Download TPS was not successful. ***
Applies to
- Models
- Signa, Discovery, Optima
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.