GE Healthcare · MRSigna
Contact Teal main number 858-558-9000 and ask for anyone from "Technical Customer Service" at Teal.
Symptom
The Main Circuit Breaker in the Teal PDU in the HFD Cabinet will not reset The main circuit breaker in the Teal PDU in the HFD Cabinet will not reset. It will not even mechanically reset (i.e. stay in the engaged position) with all power off. It doesn't "catch", it immediately swings back to the tripped position, even with all power off. With power off it should "lock" into the on position, and stay there, at least until power is applied. Therefore this is not an electrical problem.
Applies to
- Models
- Signa
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Component
- 5118444 Includes cabinet and PDU, must swap rest of cabinet over. 5118444 Includes cabinet and PDU, FE must swap rest of cabinet over.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.