Low SNR for Head and Body SPT due to setting of rrfCalibFlag (aka Calibration Type) in MRconfig.cfg incorrectly set to z…
Low SNR for Head and Body SPT due to setting of rrfCalibFlag (aka Calibration Type) in MRconfig.cfg incorrectly set to zero.
Symptom
Low SNR for Head and Body SPT. Values were approximately half normal with noise and signal both contributing. When looking through error log noticed error 2248226 See Long Description Low SNR for Head and Body SPT. Values were approximately half normal with noise and signal both contributing. When looking through error log files noticed error 2248226, see below. Error: 2248226 File: APS:RrfCalibrator::calibrate Based on the calibration flag, calibration values will be loaded from defaults
Error message
2248226 Based on the calibration flag, calibration values will be loaded from defaults.
Applies to
- Product
- 3T Eclipse For E2 software
- Software
- E2 3T Eclipse
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- 16 Channel Switch Diagnostics Fail Due to Calibration Type parameter listed in MRconfig file manually set to wrong value.
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.