GE Healthcare · Nuclear MedicineMillennium
CSE Detector Flood has a very pronounced tube grid pattern with all of the counts appearing at the corners of tubes.
Symptom
CSE Detector Flood has a very pronounced tube grid pattern with all of the counts appearing at the corners of tubes. The 2 below images are identical except for windowing. This will let you see the issue a little better. Yes, this is a flood and it's on peak with full corrections!
Applies to
- Models
- Millennium
- Product
- MG/MC/Myosight Millennium MG/MC Millennium MyoSIGHT
- Component
- *Detector (Imaging Detector) *Detector (Imaging Detector) *Detector (Imaging Detector) 5268365 Dyncor Driver Board 5268365 Dyncor Driver Board (Old P/N PCA000179)
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size