GE Healthcare · MRSigna
USA CTL 1.0 T SNR specifications on 9.1, Report Manager Does Not Contain Correct Passe/Failed limits for this Coil
Symptom
USA CTL 1.0 T SNR specifications on 9.1, Report Manager Does Not Contain Correct Pass/Fail limits for this Coil. The report manager tool does not contain the proper limits to validate the results of the USA CTL SNR test for 1.0 T systems. What are the specifications for this coil?
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.