GE Healthcare · MRSigna
Can't Extract Images from Database for Transfer Using listselect.
Symptom
Can't Extract Images from Database for Transfer Using listselect
Error message
Can't open display H6KGEHAMRMR1:0.0 See Long Description Error occurs when manually entering the 'listselect' program on a scanner accessed remotely from another scanner by Cshell telnet command. See example below. Error: Can't open display: H6KGEHAMRMR1:0.0 Note that in this case, "H6KGEHAMRMR" is the host name of the scanner that was used to telnet to the scanner that we are trying to run 'listselect' on. =================================================== Here's the session that produced the error: MRI% listselect [Enter] Press ^C to exit Error: Can't open display: H6KGEHAMRMR1:0.0
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.