GE Healthcare · Nuclear MedicineMillennium
VG GDU displays rotation = 81 degrees when the gantry rotates to the Bone Scan home position, but it should be at 0 degr…
VG GDU displays rotation = 81 degrees when the gantry rotates to the Bone Scan home position, but it should be at 0 degrees
Symptom
VG GDU displays rotation = 81 degrees when the gantry rotates to the Bone Scan home position, but it should be at 0 degrees Sometimes when manually rotated with RCU control, the error #32 occurs. VG GDU displays rotation = 81 degrees when the gantry rotates to the Bone Scan home position, but it should be at 0 degrees And sometimes when manually rotated with RCU control, the error #32 occurs.
Error message
Error # 36 ZERO SWITCH NOT FOUND, AXIS=7 ROTATION
Applies to
- Models
- Millennium
- Product
- VGH VG and VG Hawkey and Varicam
- Component
- *Gantry Gantry Gantry E9300000427 - CDL (15 Way) Slip Ring Index Board (PCB Zero Index & Encoder) E9300000427 - CDL (15 Way) Slip Ring Index Board (PCB Zero Index & Encoder)
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size