VRE Configuration failed with a dialog box "VRE Configuration Failed" due to Current Software Does Not Recognize this In…
VRE Configuration failed with a dialog box "VRE Configuration Failed" due to Current Software Does Not Recognize this Infiniband Board's Type/Rev inside the ICN.
Symptom
VRE Configuration failed with a dialog box "VRE Configuration Failed." The error logged in the VRE Install log file (/usr/local/bin/install/log/VRE_Install.log) is Unknown IB (infiniband board) See Long Description VRE Configuration failed with no error messages logged in the gesys* log, just a dialog box with an OK button and " VRE Configuration Failed ." The following error is logged in the VRE Install log file (/usr/local/bin/install/log/VRE_Install.log): Unknown IB (infiniband board)
Error message
Unknown IB (infiniband board) See Long Description The error shown below is logged in the VRE Install log file (/usr/local/bin/install/log/VRE_Install.log). Unknown IB (infiniband board) VRE Configuration Failed See Long Description VRE Configuration Failed VRE Configuration failed with no error messages, just a dialog box with an OK button and "VRE Configuration Failed."
Applies to
- Models
- Signa
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Component
- 5127452-3 Sun Image Compute Node - Gen 2 without VRF 5127452-3 Image Compute Node - Gen 2 without VRF
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.