GE Healthcare · X-ray R&FDefinium
INTERNAL AND EXTERNAL IP ROUTE TABLE CONFLICT
Symptom
INTERNAL AND EXTERNAL IP ROUTE TABLE CONFLICT Definium serial product, if the customer site has a external network environment that includes the detector IP, the external network will not work well due to the internal route table would assign the segment of detector IP to eth0 and eth1, other than eth2. As a result , the DICOM communication between magic PC and DICOM nodes of customer site can not be built up at all.
Applies to
- Models
- Definium
- Product
- Definium 6000
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- AEC Backup Time message
- Definium 8000 Auto positioning does not work after a reset/reboot due to wall stand receptor at a hard limit during rebooting or repowering.
- Definium 8000 One or both monitors display the following message on every boot
- Definium 8000 Wallstand or Table Only Configurations running VolumeRAD M3 Software.
- Definium 8000 OTS Collimator has no power due to a tripped breaker (CB8) ont he Tube Suspension Logic (TSL) Board.
- Definium 8000 The Siemens Collimator has not power due to a tripped breaker (CB9) on the Tube Suspension Logic (TSL) Board.