GE Healthcare · Nuclear MedicineMillennium2154524
Need part number for the MPR/MPS detector to gantry cable
Symptom
Need part number for the MPR/MPS detector to gantry cable MPR/MPS detector cable (cable that connects the detector to cables inside the gantry arm). Need part number for the MPR/MPS detector to gantry cable (cable that connects the detector to cables inside the gantry arm). The service manual is not clear which cable in the list is this cable, and the part numbers in the service manual are not available. 9CBL0343-B Cable Detector to Gantry 2154524-2
Applies to
- Models
- Millennium
- Product
- MPR/MPS Millennium MPR Millennium MPS
- Component
- *Detector (Imaging Detector) *Detector (Imaging Detector) *Detector (Imaging Detector)
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size