Will Not Scan with Gradient Errors.

Symptom

Error message

2238414 Y Axis Gradient Overload Occurred. The Y axis LOW 8645 Power Module has reported an overload. Error 2238414 : Y Axis Gradient Overload Occurred.The Y axis LOW 8645 Power Module has reported an overload. An overload is the result of the power module output voltage not following the input command.

2238662 The Y axis GRAM is reporting the current is distorted over a period of time FE troubleshooting intermittent GRAM errors, FE replaced GRAM, GAP and MIF and still having the same problem. The following is a copy of the error log: Wed Jul 21 20:16:54 1999 Error: 2238662 Host: pamf-mr Process: NSP File: HPC_PORT_ID:GAP/GIP Line: 1049 The Y axis GRAM is reporting the current is distorted over a period of time. The current is not what the DAC is requesting. Possible gradient driver failure. Another GRAM fault reported in the log could be the cause of this fault. FE troubleshooting intermittent GRAM errors, FE replaced GRAM, GAP and MIF and still having the same problem. The following is a copy of the error log: Wed Jul 21 20:16:54 1999 Error: 2238662 Host: pamf-mr Process: NSP File: HPC_PORT_ID:GAP/GIP Line: 1049 The Y axis GRAM is reporting the current is distorted over a period

Applies to

Models

Signa

Product

Signa LX Signa LX Product can be used with 8.x and 9.x systems.

Software

9.1 For Signa LX product only

Component

46-328206P115 CROWN A10999-G2 8645 PWR MOD W/CROWB

Area

MR

Related GE Healthcare MR issues

• Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
• Fails to Scan with TORSO Coil.
• The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
• AE title has changed on destination host.
• CWA ID100315. Auto and Manual Prescan Fails.
• What is the Acoustic Noise Level in the Ovation Magnet.