GE Healthcare · Nuclear MedicineMillennium
MG error going to cardiac position Cannot achieve 6 o'clock position on detector 2
Symptom
MG error going to cardiac position Cannot achieve 6 o'clock position on detector 2 MG error going to cardiac position. "Cannot achieve 6 o'clock position on detector 2"
Error message
VG (lock) transition failed during motion sequence VG transition failed during motion sequence." Captured Errors : 2009/02/24 16:20:29 EST mg1:gip mx;83:gip util.c[$Revision: 1.64 $] gipVgError() line 1496 error 0x07100014 level 2 severity 3 {} "Cannot achieve six Oclock position during transition (GIP E TRNS START MOVE)" 2009/02/24 16:20:29 EST mg1:tgc mx;58:moveio.c[$Revision: 1.21 $] mio gip r transition() line 1444 error 0x14300009 level 3 severity 3 {} "Geometry change failed with error 45" 2009/02/24 16:20:29 EST mg1:tgc mx;58:sequtil.c[$Revision: 1.57 $] tgc seq event() line 2333 error 0x14300003 level 2 severity 3 {} "VG transition failed during motion sequence." 2009/02/24 16:20:29 EST mg1:tgc mx;58:motion.c[$Revision: 1.94 $] tgc mot seq cb() line 2941 error 0x14300030 level 2 severity 3 {} "Opposed Geometry motion failed at step 2"Applies to
- Models
- Millennium
- Product
- MG/MC/Myosight Millennium MG/MC Millennium MyoSIGHT
- Component
- *Gantry Gantry Gantry ASM000808 MG VG Lock Swith Plate Assembly VG-LOCK MOUNTING PLATE ASSEMBLY ASM000808 MG VG Lock Swith Plate Assembly There is a VG lock mounting plate assembly which includes all the switches attached to the board. If you are having trouble with your VG lock and think the switches might be the issue, you can order this assembly
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size