GE Healthcare · CTLightSpeedVCT2601100052601323851021026011403926013312450043
LightSpeed 7.x (VCT, VCT Select, Pro32)
Symptom
Gantry fails to reset properly via the console, but resets ok with gantry re-power. see long description for more detail. Gantry fails to reset properly upon reboot, or via scan hardware reset, the message "scanning hardware reset successful" is returned very quickly, but the Ganty display is blank, and all table/gantry functions are disabled, but if the gantry is repowered via the service switches or at the PDU, the reset works properly, and the system operates normally.
Error message
Error: 260110005 The DAS/collimator firmware object had a timeout waiting for message 3003 See long description for full errors Sat Mar 21 19:14:02 2009 260110005 orp orp_subsysdas_event_mgr.cxx 1884Sat Mar 21 19:14:01 2009Host : On-Board Rotating Processor Ermes # : 260110005Exception Class : Secondary Severity : Pri/SoftFile : das_event_mgr.cxx Line# : 1884Function : No System Function ReportedScan Type : None/Unknown Scan: 0/0/0 The DAS firmware object had a timeout waiting for message 18 Sat Mar 21 19:14:02 2009 260110005 5 orp orp_subsyscoll_event_mgr.c 1357Sat Mar 21 19:14:01 2009Host : On-Board Rotating Processor Ermes # : 260110005Exception Class : Secondary Severity : Pri/SoftFile : coll_event_mgr.c Line# : 1357Function : No System Function ReportedScan Type : None/Unknown Scan: 0/0/0 The Collimator firmware object had a timeout waiting for message 18 Error: 260132385 Scan ABORT -- DAS Has Detected An Error. The DAS has received an out-of-sequence command. See long description for a sample error. Fri Mar 16 11:50:11 2007 Error: 260132385 Host: orp Process: orp_subsys File: invalid_cmd.cxx Line: 116 Fri Mar 16 11:50:10 2007 Host : Das Ermes # : 260132385 Exception Class :
Applies to
- Models
- LightSpeed, VCT
- Product
- LightSpeed 7.x (VCT, VCT Select, Pro32) V40_H_V64_G_GTM V40_H_V64_G_GTL V40_H_V32_G_GTM V40_H_V32_G_GTL V40_H_H64_G_GTM V40_H_H64_G_GTL V40_H_HS64_G_G Product Name: LightSpeed 7.x (VCT, VCT Select, Pro32) Product photographs Method of remote or software identification - See attachment for a complete list of software commands and typical results. check_config swhwinfo “swhwinfo” will have the following new switches available with the VCT M4 and PF 1.5 M3 software release (software release deploying this “swhwinfo” capability is “06MW03.?”): · -c or -classc = Outputs the Class C version, if installed, on the system · -m or -classm = Outputs the Class M version, if installed, on the system · -o or -os = Outputs the Operating System version installed on the system · -da or -date = Outputs the date and time the software was installed on the system (LFC) · -h or –help = Outputs complete details about all the available switches associated with swhwinfo · swhwinfo –c –m –o -da List of Supported Console Types GOC5 Will have a VDARC and VIG GOC6 Will have a VDIG List of softwares the product can run 09MW08.10 09MW08.11 08MW33.2 07MW18.4 06MW03.4 05MW31.6 FAQ's Table weight limit - Up to 500 lb. (227 kg) with ± .25 mm positional accuracy Tube type - D3194T D3193T(green) Current production - M4 Options - TBD Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system. Done acording to template
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required