How to Remotely Perform DICOM Ping and Test DICOM Transfer?.Use the TestDicom Command To Troubleshoot Dicom Transfer.Sig…
How to Remotely Perform DICOM Ping and Test DICOM Transfer?.Use the TestDicom Command To Troubleshoot Dicom Transfer.Signa LX.
Symptom
How to Remotely Perform DICOM Ping and Test DICOM Transfer? See Long Description The OnLine engineer, FE or ZSE, would like to be able to remotely run a DICOM ping test from this scanner to check whether a certain remote host can be reached from this scanner. The remote host pings fine using a standard ping command but this tells us nothing about whether a DICOM association will work or not. To test this we need remote access to a DICOM ping test. How can this be done?
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.