GE Healthcare · CTLightSpeed260118172
LightSpeed 5.X (60kW)
Symptom
Scanner failed to initiate scan
Error message
Error: 260118172 (40-0109) MAINS_DROP has failed See LD for error explanation Code 40 Error code: 40-0109H Message/explanation: MAINS_DROP detected The firmware of the rotation board has detected the mains drop signal activation and transmitted error to PPC kV control Potential cause: Mains drop Cable or connector between LVPS and heater board LVPS board Recommended action/ Troubleshooting guide: Check if LVPS power supply is abnormally down. Reset system. If error persists, check flat cable between LVPS and heater boards. If cable is OK, replace LVPS board
Applies to
- Models
- LightSpeed
- Product
- LightSpeed 5.X (60kW) LightSpeed 5.X (60kW) ~ Use with MDAS or GDAS HP_P_G4 HP_P_G8 HP_P_G16 HP_P_M16 LightSpeed 5.X 60KW G-DAS16 with GRE Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Component
- 2324118 JH4 AUXILIARY EQUIPED V2 - Used on HP and Brightspeed gantries. Not used on VCT See long description for details Part #: 2324118 Part Type: GP CONSUMABLES Part Weight: -98999.01 LBR Repairable: No Returnable: No Hazardous Material: N Description: JH4 AUXILIARY EQUIPED V2 FRU: Yes Status: Orderable Comments: FLS - JH4 AUXILIARY EQUIPED V2. TO BE USED PER HPOWER PROGRAM RSPL. MS20544 ON 2/12/03.
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required