GE Healthcare · X-ray R&FDefinium
Configuration information is needed for the Codonics Horizon XL Printer The Codonics Horizon XL Printer can pr…
Definium 8000 Thunder
Symptom
Configuration information is needed for the Codonics Horizon XL Printer The Codonics Horizon XL Printer can print standard 8"x10" and 14"x17" films. In addition, it has the capability to print 14"x36" and 14"x51" dry long films for long bone and scoliosis studies. Configuration information is needed for this printer.
Applies to
- Models
- Definium
- Product
- Definium 8000
- Component
- Codonics Horizon XL Printer Configuration
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- AEC Backup Time message
- Definium 8000 Auto positioning does not work after a reset/reboot due to wall stand receptor at a hard limit during rebooting or repowering.
- Definium 8000 One or both monitors display the following message on every boot
- Definium 8000 Wallstand or Table Only Configurations running VolumeRAD M3 Software.
- Definium 8000 OTS Collimator has no power due to a tripped breaker (CB8) ont he Tube Suspension Logic (TSL) Board.
- Definium 8000 The Siemens Collimator has not power due to a tripped breaker (CB9) on the Tube Suspension Logic (TSL) Board.