GE Healthcare · X-ray R&FDefinium
Table detector full field of 41 X 41 cm at 100 CM SID only measures 38 cm on the monitor.
Definium 8000 Thunder
Symptom
Table detector full field of 41 X 41 cm at 100 CM SID only measures 38 cm on the monitor. Customer complaint that a table detector full field-of-view (41cm x 41cm) image taken at a 100cm SID only measures 38cm as displayed on the monitor. The collimator sizing functional check yields a 404mm x 406mm field size for the selected FOV of 410mm x 410mm.
Applies to
- Models
- Definium
- Product
- Definium 8000
- Component
- All Digital Rad Detectors
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- AEC Backup Time message
- Definium 8000 Auto positioning does not work after a reset/reboot due to wall stand receptor at a hard limit during rebooting or repowering.
- Definium 8000 One or both monitors display the following message on every boot
- Definium 8000 Wallstand or Table Only Configurations running VolumeRAD M3 Software.
- Definium 8000 OTS Collimator has no power due to a tripped breaker (CB8) ont he Tube Suspension Logic (TSL) Board.
- Definium 8000 The Siemens Collimator has not power due to a tripped breaker (CB9) on the Tube Suspension Logic (TSL) Board.