Unable to Scan due to DSP2 Handshake Error.
Symptom
Unable to Scan due to DSP2 Handshake Error See Long Description Information dated 12/19/2008: iTrak # 13229891 The system log contains a “DSP2 Handshake” error message upon the initial boot of a system loaded with software release 15x_0845.c (15.0_M3_0845.c). Gradient diagnostics including Hammer and Framing/Clock Stop tests fail. Subsequent TPS Reset attempts have the same results. Swapping hardware such as GP3, STIF, SRF, and fiber optics does not eliminate the error. 14x software on the same system does not log the error. 2244720 2 BROCKGEMR78 NSP SCP:Grad 2339 Exception Class: Unknown Severity: Unknown Function: Gradient: N/A PSD: Unknown Coil: Unknown Scan: -1/-1 DSP2 on the GP did not respond to the last interrupt request (Handshake Error). Please perform a TPS Reset and try again.->
Error message
2244720 DSP2 on the GP did not respond to the last interrupt request (Handshake Error). Please perform a TPS Reset and try again See Long Description 2244720 BROCKGEMR78 NSP SCP:Grad 2339 Exception Class: Unknown Severity: Unknown Function: Gradient: N/A PSD: Unknown Coil: Unknown Scan: -1/-1 DSP2 on the GP did not respond to the last interrupt request (Handshake Error). Please perform a TPS Reset and try again.->
Applies to
- Models
- Signa
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.